Your Cart is Empty
BIT DOES NOT COME COLORED AS SHOWN IN THE PICTURE
**BLUE PAINT USED FOR PHOTOGRAPHY PURPOSES ONLY**
BITS MAY COME W/ RUST INHIBITOR COATING (ORANGISH / RED) OR NO COATING AT ALL DEPENDING ON PRODUCTION.
The Borit 3 inch bit can be used for all metal pipe runs requiring two inches of clearance. It is manufactured in the United States and designed to bore through most soils with ease.
Borit Tool FAQ »
Borit Tool Instructions »
great product
Product works well and shipped in a timely manner
Boring bit sizes used: 2" and 3". Soil conditions: undisturbed Georgia red clay with an occasional mix of coarse, hard packed sand/clay. Boring method: moderate forward pressure was applied to drill/Borit rig so that boring rotation stayed close to 250 rpm, forward progress was limited to one inch every three minutes. After ten minutes boring time on each of the two bits, the cutting edges of both bits were rounded over. Now considering applying tungsten-carbide granules to the bits' cutting edges.
works well
great service
Fantastic product, Easy to use. saved me $7,000.00 bhased on bid from a trenching company. Can't show my appreciation enough
Went for the kit with the one 2" bit but now know should have got the next kit up with both 2 and 3" boar bits. Otherwise I love this product. Just finished a 40 foot boar in one attempt and came out the other side within and inch. visiting contractors ask about it constantly.
Bought this one for a 2” sleeve. Went right through the area we needed. Installed the pipe with ease. Definitely worth the money.
The boring tip for my Borit machine worked well.
Replaced quickly
Please wait...
