Water-Cooled

Cooling Systems

System Specifications*

Model (60Hz)	Capacity*	Pipe Size	A	B	C	D	E	F	Electrical
DP25WC	3,760 BTU/H	1/2” In/out	33”	14”	14”	7.5”	10”	2.5”	115v / 1ph / 60Hz
DP50WC	6,320 BTU/H	1/2” In/out	33”	22”	14”	7.5”	10”	2.75”	115v / 1ph / 60Hz
DP88WC	9,600 BTU/H	1/2” In/out	33”	22”	14”	7.5”	10”	2.75”	230v / 1ph / 60Hz
DP200WC	15,680 BTU/H	5/8” In/out	50”	22”	18”	10.5”	13”	2.75”	230v / 1ph / 60Hz

Versatile enough for use in any cellar...

Accepts inlet water temperatures as cold as 45°F (7°C) and as warm as 85°F (29°C)
Easy access water connection points on side of unit
High-static-pressure fans for extended length ductwork
Multiple supply and return air openings
Multi-panel design provides easy access for service

Sophisticated enough for use in your cellar.
- Lightweight, corrosion-resistant, aluminum exterior
- Completely self-contained design
- Every unit is factory tested prior to shipment
  - Made in the U.S.A.

Water-cooled unit with ductable supply and return evaporator section

Wine is your passion. Preserving it is ours.

Wine Guardian water-cooled systems are ideal for geo- thermal, cooling tower and lake water applications. Water-Cooled systems remove the need to exhaust heat, but require a year-round water supply. Water-cooled units
are available in 60Hz and 50Hz configurations. 60Hz wa- ter-cooled ducted units are available across our ducted systems lineup (D025-D200). 50Hz water-cooled systems are available in four capacities from 880-3,812 watts.

Features include the following:

Accepts inlet water temperatures as cold as 45º F (7º C) and as warm as 85º F (29º C)
Includes an integral water regulating valve for efficient system operation
Includes main control board with tie-in points to control geothermal pumps
Easy access water connection points at side of unit
Options include integral humidification, electric heat, remote control and monitoring and duct kits
Completely self-contained design
Multiple supply and return air openings
ETL and CSA approved (60Hz); CE approved (50Hz)
Factory tested prior to shipment

*Sizing note: Many variables affect proper unit sizing, including type of construction, insulation values, amount of glass, residential vs. commercial applications, etc. Proper unit size should only be determined by using the Wine Guardian cooling calculator. Check with your Wine Guardian authorized distributor for more information. Not all systems may offer all the features described above. For instance, humidity can only be controlled if the unit is equipped with a humidifier.
Wine Guardian systems are made in the USA. Manufacturer reserves the right to make changes to this document, without prior notice, at its sole discretion.